Why Your Drill Keeps Slipping on Tiles (And How to Drill Without Cracking Them)
There is something particularly stressful about drilling into a finished bathroom wall.
One wrong move, and that expensive tile you carefully installed could end up with a crack running straight through it.
The good news? Drilling tiles is not particularly difficult. The trick is understanding what you are drilling into and resisting the temptation to force the tool.
Ceramic and Porcelain Are Not the Same
Ceramic tiles are generally softer and easier to drill. A good carbide-tipped tile bit will usually handle the job without much trouble.
Porcelain is different. It is denser, harder, and less forgiving. For these tiles, a diamond-tipped drill bit or diamond core bit is usually the better choice.
Using an ordinary masonry bit on porcelain is often where the trouble starts.
Stop the Bit from Wandering
That slippery glazed surface makes it difficult to start a hole accurately.
A piece of masking tape over the drilling position can help a suitable pointed tile bit grip. Mark your hole clearly and start slowly.
For diamond core bits, use a drilling guide or carefully establish a shallow groove at an angle, following the manufacturer's instructions.
Once the bit has established its position, keep it steady.

Speed and Pressure Matter
The biggest mistake beginners make is pushing harder when the bit stops cutting quickly.
Tiles do not respond well to force.
Use a variable-speed drill with hammer mode switched off. Keep the speed appropriate for the bit and apply gentle, consistent pressure.
Many diamond bits require water cooling to prevent overheating. Keep water away from electrical connections and follow the bit manufacturer's instructions.
Remember What Is Behind the Tile
Once you penetrate the tile, the material behind it may require a different drill bit.
Check for hidden pipes and electrical cables before drilling. Use the correct wall plug and fixing for the underlying wall, rather than relying on the tile itself to support the load.
A neatly drilled hole is worth the extra preparation, especially when fitting bathroom accessories, mirrors, towel rails, or kitchen shelving.
For diamond drill bits, tile bits, drills, and measuring accessories, browse Tools4.co.za or ask the Tools4 team which combination suits your particular tiles.