0
Enjoy full flexibility when drilling and screwdriving: the completely electronic torque adjustment, CENTROTEC quick-change system, as well as angle attachment, eccentric attachment and depth stop can handle any drilling or screwdriving task. The combination of the Li-HighPower battery pack and maintenance-free brushless EC-TEC motor means that the T 18 3 cordless drill is light, long-lasting and durable. The cordless screwdriver and battery pack are completely covered with the Festool SERVICE, giving you peace of mind for your day-to-day work. Available in T-design or – depending on personal preference – in the unique C-design as the C 18.
Intelligent motor management:
The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.
Durable and extremely light:
The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.
Work comfortably:
The light T-design, the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.
Extra mobile with vehicle integration:
The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.
Ideal for tight spaces:
As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the T 18 3.
Six bits always to hand:
The practical bit holder provides space for up to six bits – magnetically secured against falling out.
In the smallest of spaces:
The angle attachment is perfect for work around corners and reaching concealed screws at tight angles
Living on the edge:
Every screw can be reached with the eccentric adapter.
CENTROTEC quick-change system:
Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.
Chuck for standard tools:
The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.
Optimum power performance:
Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.
Optimal lighting:
The integrated LED light permits precise work even in dark corners.
Electronic. Speed control for adjusting to all types of materials.
FastFix. Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Torque shut-off. Intelligent technology ensures the optimum screwdriving force for every material.
EC-TEC motor. The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.
Battery voltage: 18 V
Gears: 2
Idling speed, 1st gear/2nd gear: 0 - 450/0 - 1500 min⁻¹
Drilling diameter, wood/steel: 45/13 mm
Torque adjustment 1st/2nd gear: 0.8 - 8/0.5 - 6 Nm
Max. torque, wood/steel: 35/50 Nm
Chuck range: 1.5 - 13 mm
Product weight with battery: 1,70 kg
Drive type: Battery
Drilling in metal: Standards series EN: 62841
Drilling in metal: Uncertainty (noise) K: 5,00 dB
Drilling in metal: Uncertainty (vibration) K: 1,50 m/s²
Drilling in metal: A-weighted sound pressure level, LpA: 64,00 dB(A)
Drilling in metal: A-weighted sound power level, LWA: 75,00 dB(A)
Drilling in metal: Total vibration average, Ah: 2,70 m/s²
Fastening: Total vibration average, Ah: 2,50 m/s²
Fastening: Standards series EN: 62841
Fastening: Uncertainty (noise) K: 5,00 dB
Fastening: Uncertainty (vibration) K: 1,50 m/s²
Fastening: A-weighted sound pressure level, LpA: 64,00 dB(A)
Fastening: A-weighted sound power level, LWA: 75,00 dB(A)
