Hikoki 1/2" Cordless BL Impact Wrench 18V 305Nm (Bare Tool) | WR18DBDL2-W2

Hikoki 1/2" Cordless Impact Wrench 18V 305Nm (Bare Tool) | WR18DBDL2-W2.

Features:

Our Original Brushless Motor Technology:

• No wearing parts (carbon brushes, commutator, field coil)
• Our original compact controller

Long Lifetime, Maintenance-Free:

• The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.

Powerful. More Torque. More Power:

• The max tightening torque is 305Nm for the 18V WR18DBDL2 and 285Nm for the 14.4V WR14DBDL2.
• The torque is increased by 55Nm (18V) and 50Nm (14.4V) respectively, compared to our conventional models (WR18DBDL, WR14DBDL).

Compact Design for Better Handling:

• The overall length is 145mm, which is 23mm shorter than that of our conventional models (WR18DBDL/WR14DBDL).

Highly Efficient. Longer Runtime per Charge (Approx.):

• When loosening M20 high-tension bolts tightened at 350 Nm.

Tightening Mode Selector for a Variety of Applications:

• The tightening torque depends on the material, size and class of the bolt. Make a test fastening to adjust the mode setting to suit the bolt.

Smooth Socket Changes with a Friction Ring Anvil:

• The friction ring holds a socket on the anvil, making it easier to install a pin and O-ring to securely lock the socket in place.

Note: It is possible to temporality hold the socket in place with the friction ring, but be sure to insert the pin and attach the O-ring before use. If the power tools is used while the socket is temporarily held in place, the socket may fall off and cause an injury.

Newly Designed Airflow System for Optimal Cooling Efficiency:

• The rear fan efficiently cools down the motor and hammer case for more durability.

*Cordless impact driver shown for illustration purposes only.

Well-Balanced Weight Distribution for Better Work Efficiency:

• Less user fatigue due to the well-balanced design with the center of gravity positioned at the middle finger of the grip hand.

*Cordless impact driver shown for illustration purposes only.

Dust and Water Resistant:

• Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.

*The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.)

Fast Charging Offered by Our Original Charging Technology:

• Built-in cooling system of the UC18YSL3 charger reduces charging time by efficiently cooling both the battery and charger at the same time during charging.

Smooth Control Electronic Switch:

• allows for finer adjustments in the low speed range. It is also more efficient in transferring energy resulting in longer tool life.

Other Features of the UC18YSL3 Charger:

• Large charge indicator lamp with 4 color status LED and sound alert once charging is complete
• USB port (5V 2A)
• Capable of charging at low temperature (-10°C and above)

Technical Data:

Capacity Bolt: M10 - M20 (3/8 - 3/4")
Capacity High Tension Bolt: M10 - M16 (3/8 - 5/8")
Square Drive: 12.7mm (1/2")
Tightening Torque: 305Nm (225ft-lbs.)
Battery Voltage: 18V
No Load Speed High Mode: 0 - 2,700/min
No Load Speed Medium Mode: 0 - 2,000/min
No Load Speed Low Mode: 0 - 1,000/min
No Load Speed Single Mode: 0 - 2,700/min
Full Load Impact Rate: 0 - 3,600/min
Overall Length: 145mm (5-11/16")
Weight *1: 1.8kg (4.0lbs.) with BSL1860, BSL1850, BSL1830. 1.5kg (3.3lbs.) with BSL1830C
Vibration Total Values (triax vector sum) *2: Vibration Emission Value = 11.7m/s2 | Uncertainty K = 1.5m/s2
Standard Accessories *3: 2 Batteries (BSL1860, BSL1850, BSL1830 or BSL1830C), Charger (UC18YFSL, UC18YSL3 or UC18YML2), Battery Cover, Carrying Case

1*. According to EPTA-Procedure 01/2003.
2*. Vibration total values (triax vector sum) determined according to EN60745.
3*. The included batteries and charger vary by country or area.