Milescraft Drill Pump 300 Multi-Purpose Drill Water Pump | 1313

Milescraft DrillPump300 Multi Purpose Drill Water Pump | 0821313.

MULTI-PURPOSE DRILL WATER PUMP – PUMP WATER FROM VIRTUALLY ANYWHERE, A FLOODED BASEMENT, TO A SIMPLE FISH TANK.

The DrillPump300™ is designed to work with most electrical drills with a maximum speed of 2,800 RPM, with an output of at least 600 W. This water transfer pump is ideal for draining small ponds, fish tanks, small pools, or even a flooded basement. The hose connection is 1/2” and uses any 1/2” hose. The unit pumps up to 300 gallons per hour and is self-priming up to 9 feet. The 3/8” shank on this unit fits all common chucks for most drills.

DrillPump300™ Features:

• Pumps up to 300 gallons (1,300 liters) per hour
• Self-priming up to 9 feet
• 3/8” shank on this unit fits all common chucks
• 1/2″ hose connection

Tips & Tricks:

• The power drill may only be operated in clockwise rotation, never run DrillPump300™ in reverse
• DrillPump300™ will not turn by hand, this must be chucked to the drill
• DrillPump300™ must be mounted for proper usage, do not hold in hand
• The hoses should be in good condition, include a gasket, and be completely tightened for priming
• After every use apply a small amount of silicone grease. To apply, remove the black housing screws and cover, and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. Any spray lubricants, such as WD-40, are not recommended, as they do not provide sufficient lubrication for this product and can cause damage to the internals of the pump.
• Do not get the drill wet, or use the drill pump with flammable liquids.
• The direction of flow is indicated by an arrow on the housing.
• The delivery rate can be regulated by the speed of the power drill.

Technical Data:

Delivery Rate Max: 300 Gallons / 1,300 liters per hour
Hose Connection Size: 1/2" (13 mm)
Hose Diameter 1/2ˮ (13 mm): Pump lift 15 m
Suction Height: 9 ft. (3 m)
Dry Running Max.: 30 seconds
Drill Output Min.:600 W
Rotation Speed Max.: 2,800 RPM
Shank Diameter: 3/8" (9.5mm)
Housing Material: Glass Filled Nylon (PA6)
Weight: 0.4 lbs