OSMO Intensive, 8019 Cleaner Clear, 1L | 15101050

Highly effective, lightly alkaline special cleaner for removing organic and inorganic deposits in indoor areas. Ideal for intensively cleaning oiled and waxed surfaces before the actual surface treatment with Osmo finishes.

FEATURES & BENEFITS:

• Highly effective intensive cleaning
  
• Restoration of wood surface without sanding
  
• Easy application
  
• Ideal for public and commercial use
  
• Can be used for interior and exterior

COLOUR TONE:

8019 Clear

RECOMMENDED USES:

Osmo Intensive Cleaner is ideal as an alternative to sanding all wooden surfaces treated with oils and waxes, e.g. flooring or furniture, and also suitable for cleaning plastics, stainless steel and other waterproof surfaces.

INGREDIENTS:

Alkaline basic cleaner (according to EC Regulation 648/2004 on detergents): <5% cationic tensides; nonionic tensides; silicates; complexing agents. Detailed declaration of ingredients available upon request.

STORAGE:

2 years and longer if stored in the closed original can.

SURFACE PREPARATION:

Remove loose debris from the surface with a firm broom or hand broom. Dilute concentrate with water, 1:10 - 1:20. A trial application is absolutely necessary.

METHOD OF APPLICATION:

Apply cleaning solution to the contaminated area, loosen dirt deposits and remove dirt with clear water. For machine applications on flooring, we recommend using a single disc machine (e.g. Osmo FloorXcenter) with a brush ring, a red or green pad. Remove dirt deposits with Osmo Micro-Mop Plush or a lint-free cotton cloth. After drying, recoat oiled or waxed surfaces with an appropriate Osmo wood finish, e.g. Osmo Polyx®-Oil Original.

CLEANING OF TOOLS:

With Water

DRYING TIME:

Approx. 3-5 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.

COVERAGE:

1 litre covers approx. 30-100 m² with one application, depending on the amount of dirt and stains.

NOTE:

Do not use undiluted. Osmo Intensive Cleaner may cause discolourations or surface changes on unfamiliar subsurfaces. Woods rich in extractives (in particular Oak) discolour when coming in contact with undiluted Osmo Intensive Cleaner. Even when diluted, always carry out a trial application. Do not allow the solution to dry. Not suitable for daily cleaning.

CAUTION:

Contains disodium metasilicate. Causes skin irritation. Causes serious eye damage. Reacts with acids with evolution of heat. Risk of splashing! The general safety regulations when handling chemicals must be observed. Keep out of reach of children. Read label before use. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN: Wash with plenty of water. If medical advice is needed, have product container or label at hand. Safety data sheet available on request.

DISPOSAL:

Dispose of leftover product and completely emptied packaging according to local official guidelines (waste code number 07 06 01*). Only completely emptied cans can be recycled.

TECHNICAL DATA:

Specific gravity: 1.05-1.10 g/cm³
Viscosity: 20 - 25s (3 mm, DIN 53211)
Odour: faint/mild, odourless after drying
Flashpoint: not required

DOWNLOADS:

Download the PDF product information and safety data here:

Product Information
Safety Data
Osmo Brochure

SCOPE OF DELIVERY:

 1 x OSMO Intensive, 8019 Cleaner Clear, 1L

MANUFACTURERES WEBSITE:

>>>Visit for More Info<<<